John Hubert tupillim@f2s.com, from Carmarthen Wales UK

28/07/8

Milliput is such an incredibly useful and effective product that I find it hard to understand why it is not available everywhere. I have used it for every kind of repair job for years and years. Plugging, fixing, sealing, reshaping - everything! I couldn't live without it! Every job lasts forever too. Perhaps as the recession bites deeper, we will become a less "throw-away" society and value Milliput more.

Alex , from York England	12/06/8
I have been using milliput for just under a year now for sculpting and converting Warhammer models, my models would be alot less individual without it!

richard gale , from	20/03/8
i originally used milliut for my figure modelling. i now use it extensively in my trade as a ceramic designer. definately one of the best products. its almost too good to be belived. and amazing that it can be worked with unprotected hands. if all else fails, milliput!

alwyn luke owen.luke@hotmail.co.uk, from ruabon,wrexham Clywd Wales

20/03/8

I have used Milliput several times over the past few years, and i think the product is fantastic! I have mainly used it to repair my motorbike exhaust pipes etc, but i have also used it for general D.I.Y repairs around the house. I know you dont endorse using the microwave oven to warm up the sticks, but i do put them in for about 15 seconds on full power, and i find that i can knead them together with a knife and then finish off mixing by hand. the warmth from using the microwave allows me greater flexibility when applying the putty to the job. Thanks again for a great product, i get it from a local store in Rhos, near Wrexham. It flies off the shelf as soon as it comes in, so i always buy a box when im up in the village! Hope youve found this of interest, many thanks, alwyn luke.

ROB hEY susan.hey06@btinternet.com, from Aberdeen Scotland	19/12/7
I have been using Milliput since the mid '70s. Not just for filling gaps in models, but for original work, small part casting, domestic repairs, auto repairs.... the list goes on. There isn't much that Milliput won't do, and a lot that Millput CAN do better than anything else. My only comment is that it can sometimes be difficult to get.

Richard Wright ricoletabc@tiscali.co.uk, from Lancashire England

27/10/7

I first met Jack when my job involved inspecting factories for fire precautions but as we found we had a common interest in Alpine Plants I tended to go there more than my job required. The fact that we lived just a few hundred yards apart meant garden visits were also possible. Jack was just starting in Milliput but he told me in glowing terms about its properties and I was not surprised some years later, again doing inspections but this time on a country wide scale to find he had moved to Dolgellau which is where I next visited him and learned all about his move to world-wide production. He was a wonderful friend and it was most distressing to hear, when next I was planning a trip to Wales that he had passed away. A lovely man who I was priveledged to know.

paul mckeever paul.mack50@ntlworld.com, from manchester lancs	12/08/7
I have used the black milliput to patch up a hole in my motorcyles exhaust ,I own a Honda pan european and the system is not cheap , but milliput has done a great job ,and saved me a small fortune .Well done for producing such a brilliant product ,I,ll certainly spread the word, as well as the milliput..thanks once again.

Henry Nurdin henry@severnmediagroup.com, from Newtown Powys UK	01/08/7
Hi - the guestbook is now fully functional once again!

Dave Short dave@daveshort.co.uk, from Wythenshawe U K Manchester	22/05/6
A good friend told me about Milliput a while ago and l have used it for DIY in the home and on the car and in the garden - many times ever since. I keep a spare carton handy for emergencies. Great product, thanks!

ltguys ltguys123rbc@yahoo.com, from texas tx usa	21/01/6
your site is excellently done.keep it up.

Dave Whitbread , from Plymouth UK.	02/01/6
Happy New Year to all at Milliput and all those who have found so many wonderful uses for the medium. Dave

Paul Stafford paul3775@aol.com, from Hemel Hempstead Herts England	08/11/5
Just to say that your putty saved me from buying a new washing machine when i left a 3/16 wood drill in the machine and pierced the drum at the bottom, making a small hole. This was easily solved with a lump of your wonderful "MILLIPUT". It filled the hole a treat. Cheers, Paul Stafford

Ray Rew , from Prescot Merseyside

07/10/5

I have been using your excellent product for over 20 years and have found it to be the most useful 'tool' in my toolbox. If anything needs fixing, the Milliput pack is the first thing that I reach for. I have used it to repair, pipes, hot water cylinders, car radiators, guttering, roof tiles, brickwork/flashings, electrical items..... After 20 years,I am still finding new uses for it. As I go around the house and garage I am forever spotting 'temporary' repairs that I have made with it years ago! It is a product that I would not be without. Recently I discovered the other varieties of Milliput and am looking forward to putting them to good use in the future. Thanks again Milliput for saving my bacon on so many occasions in the past. I wish you every success in the future

Henk Timmerman , from 's-Gravenzande The Netherlands	15/07/4
My compliments for your exposy putty. This putty is very helpfull by my mastermodelling. Soon I will add some information about Milliput on a new page in my website. Best regards, Henk

june ripley gary.ripley@sympatico.ca, from orono Ontario canada	26/06/4
I started using milliput after seeing my sister use it to repair an antigue vase while I was on holiday at her house. I've now used it numerous times on my own antiques also used for fixing things for friends, I am down to my last little bit so would like to order a couple of tubes of the super white fine.

Beverley Phillips bp2000@att.net, from Birmngham Alabama USA

15/06/4

My daughter & I just returned home from a great trip/exploration of North Wales. Once back home we decided to serve ourselves tea in a more "British" manner, so I went to the cabinet & found my aunt's old, well used teapot. Unfortunately the spout had a small chip on it, and of course, that would not do. So I called my mother, who is a collector & doll repairer, and asked her if she had something to repair ceramic. On her next visit she produced a brand new box of Milliput! I was astonished to see that it came from Wales. I have just repaired the teapot and a sugar bowl also, and am about to go looking for other things to repair. It's a wonderful product!

Mike Barter , from Essex England	12/04/4
Yet another sculptor who has discoved the wonders of milliput, ive told all at my workshops

bob griffiths bobby296@hotmail.com, from redditch worcs england

16/02/4

I have been useing milliput for 20 years or moreas a plumber,and inthe house and car.Some of the things i have done with milliput are repair a hole 3 inchs long in a plastic soil pipe with a pancake of milliput,put a spark plug in a striped thread in my cylinderhead ,reaired holes in exhaust and petrol tank,repaired hiles in ceramic w.c pans ,repaired burst pipes on a temporary basis and last but not least any left over milliput i have made into the shape of a hook licked the bottom and stuckit to the wall in my garage and used it to hang things on for the last ten years. gods gift to plumbers , good stuff keepup the good work.

Dan Smith , from Evesham Worcs UK	14/06/3
GW Modellers: forget Green Stuff- I've used Milliput for 15 years for all my modelling and filling needs. Great stuff; but don't mix too much at once, because it sets pretty quick if you are trying to do very fine detail. Keep the stuff coming!!

Jean Johnson bingobunnyj@blueyonder.co.uk, from SHEFFIELD,nearest S-Yorkshire UK	29/04/3
I have been given the task of finding your product on sale in our area,my huband as saved the carton,(empty i mite add)for about 2 years now. He says it is the best bonding agent he as ever used..Hope i am able to find some ,as he as a small oil leak in his Sump??? J.J.

Os os@riverstreet.org.uk, from Bristol Avon UK	25/04/3
Just a note to thank you for just the best sculpting material ever! more catalyst to your chemicals!

Dewei pazu.nospam@pacific.net.sg, from Singapore	10/12/2
Milliput is extremely versatile yet so easy to use. I have found countless application for it in making models. Excellent product that every modeler should have!

Mark Bibby mark@bibby3954.freeserve.co.uk, from Staffordshire	03/10/2
As a freelance sculptor i have created figures for many people (The royal regiment of Wales museum in Brecon and the Viscount Chelmsford to name two) and all of my work has been created from that amazing putty called Milliput.

Tom Alien_Newt@hotmail.com, from Midlands Warwickshire UK	30/09/2
Thankyou Milliput!! Just got my £500 deposit back on a flat which several robust parties managed to transform into a burnt out shell! Had I not been able to rebuild my flat almost from scratch out of Milliput then I would be a bit "unstuck"! This stuff is a miracle worker!! All praise the mighty Putty Head in the Sky!! Halleighlooleeya!! :D

Jim Anderson Nathan Flowers skyraider2002@hotmail.com, from Toronto Toronto Ontario Canada	21/09/2
Just great, its multifuntional, it's just the best of the best, and economical what's more. Highly recommended by: Mr. Nathan

Karen milliput-masterpieces@hotmail.com, from Essex UK	27/06/2
I use Milliput to personalise lighters for people .. it's easy to use and I'd recommend it to anyone .. My site is www.milliput-masterpieces.co.uk

Michael Kuban michaelkuban@hotmail.com, from Lancaster Ca USA	26/06/2
Just getting into miniatures and found this site - I am really excited and looking forward to working with them aterial soon. PS: Love the links and general information! Thanks!!

Paul Fereday ashfordbikes@yahoo.co.uk, from Ashford Kent England	07/06/2
One word sums it up . EXCELLENT. I have used it in loads of applications .

Chris Bailey chris@inkworm.co.uk, from leicester	21/05/2
I first discovered this stuff as a kid and still use it for figure modelling, thanks

Ian Wright , from Colchester Essex England	01/05/2
I just used milliput to fix my exhaust ....... works a treat the best thing i have ever used for this kind of repair ......... one word of caution .. let it set completely before running engine as it goes soft again for some reason if not quite set .... may be the moisture and air pressure ..... but once set ...Brilliant

Glenn Wallbridge glennfaw@wildmail.com, from London Middlesex United Kingdom	11/04/2
Just discovered your website, after recommending milliput to a number of wargaming friends abroad. very good indeed. I've been making and customising model wargames figures using milliput for around twenty years, as well as using it for all sorts of DIY and repair jobs. I can't praise it highly enough.

Karen Gale lugluk@aol.com, from williamsburg USA virginia	02/04/2
Thank you for this very helpful site. It's well done and most appreciated!

Bruenor , from Grantham England	14/02/2
I use Milliput to make my custom action figures and would like to thank all involved for a great product.

Jim Anderson Flowers jimandersonflowers@hotmail.com, from Wilmington Delaware USA	30/01/2
Hello!!! Congratulations, Milliput has been very helpful to assamble my military planes, effective and easy to get, so I cant work without it, it also helps me to create new model kits of airplanes that doesnt not even exist in the market, so far, such as the MiG 1.42, what's more. Can epoxy resin be used the same way as fibre glass to create body kit parts for some other kits?

louis lamb loo_e@hotmail.com, from Whangarei Northland New Zealand	29/01/2
can epoxy resin be used the same way as fibre glass to create body kit parts for a sports car.

Geoff Sandford geoffmarg@ic24.net, from Wigan Lancs UK	04/10/1
I have used Milliput for my models for over 20 years and couldn't be without it. It makes my model kits stronger. Well done

Gallacher Ian , from Worksop Notts UK	10/09/1
Me tooooo ! I use it to create original 'artwork' with the clasic clipper lighter. I also find it dead handy to plug the security gaps in several of my websites (some for major blue chip clients) Milliput --- Can't beat it. Milliput --- Can't eat it !

Rosemary rosegolcher@yahoo.com, from San Jose Costa Rica	07/08/1
I'm so impressed about what Milliput Superfine can do. I have never used it before, but I first knew about Milliput several months ago in a restoration place at a museum and they were fixing a porcelain. I hope to get it soon.

Niels Niels07@aol.com, from Berlin Germany	11/07/1
ILm Very Happy to find Milliput in Geman Modeller Stores, I think it is the best putty in the world! iLts the best of all Puttys.Could you tell me since when you exporting the putty(epoxy) to germany? I guess long time ago, isnt it?

Noel Moore garethmoore@mail.bigpond.com, from Hobart Tasmania Australia

07/07/1

I took up military modelling about 10 years ago. Tiring of the shop-bought models, I decided to make mine from scratch. Searching for the right medium, a modelling book pointed me in the direction of Milliput which I had no trouble finding at a local hobby store. I'm still perfecting my hobby as well as experimenting with Milliput. It's fantastic to use and my preference is for the standard brand. All the best

Wolfgang wosto@freenet.de, from München Germany Bayern	13/06/1
I´m Happy to find Milliput in Geman Modeller Stores, i´ts the best of all Puttys.

J A Budd , from Guelph Ontario Canada

10/05/1

I latched onto Milliput about a decade ago when I began to get involved in table-top combat games that involved miniatures. I have used it for everything from miniatures, to sculpting art, to car (body and exhaust) repairs, and canoe repairs. I love Milliput and have always sworn by it. Unfortunately I haven't been able to find it in my area for a number of years, and have tried a dozen different products with horrible results. Nothing can replace Milliput. I'm just lucky and thankful that I stumbled upon your website, and hopefully now I'll be able to locate a retailer who stocks it, thanks to your Info Request Form. AWESOME STUFF! Thank You!

Tim , from Newton Stewart Scotland	17/03/1
Wicked stuff, i make master jewlery peices out of it ehtn use itto cast them. Great stuff....

snarl snarl6@hotmail.com, from bristol avon u.k	09/02/1
I Looooove milliput i cracked the the block on my engine of my MK1 golf driver ,the oil was spilling everywhere nothing i tried worked, except MILLIPUT this amazing stuff saved my car and probably my marriage , and now my friend has used it to fix his car and maybe his marriage to ha ha ha ha ha !!!!!!!!!!WAhey OOOOOOOOooooo

Kathleen leoblack@telusplanet.net, from Gibbons Alberta Canada	29/01/1
I love this product for repairing dolls (plastic) How would it be for rubber? I just find it so hard to find- but how that I found this site -My troubles may be over.

Hamlin's Restoration Studio hamlinsrestoration@msn.com, from Ballwin MO USA	17/01/1
As a professional restorer of fine china, porcelain and pottery I wouldn't be without a good supply of Milliput. I've tried many other types of fill but nothing matches up to the ease of use and beautiful results. We can duplicate the finest flower or leaf with Milliput and its hard to tell which is the original. I recommend it to all our students.

Frank Kokosza kokosza@worldnet.att.net, from Raleigh North Carolina US

24/11/0

I have been using Superfine Milliput on my models and figures for about three years now; it is easily my favourite epoxy putty of the many brands I have used. In fact, I have a box that has been in my refrigerator for three years, without any sign of deterioration or impact to its workability. I have endorsed Milliput to my friends at ModelCarList and NASCARlist, although I did not disclose to them that I had once used my favourite modelling resource to repair the cracked exhaust manifold on an old car, with excellent results.

Simon Moskal schimele@imagelink.com.br, from Rio de Janeiro Brazil Brazil	03/11/0
Hello y am looking for antiek soldiers Scotch soldiers with Kilt and cornebuse. Also legioneers and so interesting thingts.Y am Belgium. Will be happy to here from you Simon Moskal

Charles charles@darleys.co.uk, from Kent	02/10/0
Thaqnks for a great site. I am building a large model boat and making figures at a scale of 1/31. I wil put a plink from my site to yours as I have mentioned that I am using Milliput for the figures. Kind regards Charles my site is at http://www.darleys.co.uk and follow the link to Scotline model of Scot Ranger.

James Fryer jim@babylamb.com, from Shoreham-by-Sea Sussex UK	08/07/0
I was just using Milliput to repair a small hole in some plumbing and while mixing it I thought I'd see if there was a web site... It lasts a LOT longer than two years, I bought my pack in 1983! I don't use it much, but it really comes in handy when I need it.

Lindsay Thompson linzthom@voyager.co.nz, from Christchurch New Zealand	19/05/0
I have been using Milliput for masters and general modelling for years. I have been using Super Fine for a new range of masters for "NEW ZEALANDS WARS" which will be out latter this year at www.colonials.co.nz

Geraint Davies geraint@penypylle.freeserve.co.uk, from Holywell Flintshire UK

05/01/0

Milliput saved my life......About two years ago, whilst re-installing a shower unit, I accidentally dropped the shower mixer taps into the ceramic shower tray. Imagine my fear when I had to explain the mysterious appearence of a non-waterproof, large chip in the showertray, to my wife. How was I to repair it? (and avoid serious bodily damage!) I sought the urgent aid of my plumber who produced a tube of milliput (white). He went onto explain that milliput is one of his most reliable tools. Having never used Milliput before and in complete ignorance of it's qualities, I set about my repair task with some trepidation and much apprehension. Even I found the putty easy to use and apply and to thi